Hydraulic Cylinder Seal Oil Seals Flexibility PTFE PA Phenolic Fabric Dust Ring Rod Fi Seal

• Customization: Available
• Material: NBR/FKM/PTFE/PU/POM\PA/Peek/Silicon/EPDM
• Application: Hydraulic Cylinder/Construction Machinery
• Model NO.: FI
• Type: Guide Ring Seals
• Performance: Durable/Water Resistant/Oil Resistant/High Tempera
• Shape: Guide Ring Seals
• Standard: Standard
• Speed: High Speed
• Lip: Single Lip/ Double Lips
• Color: Black, Brown, or as Your Request
• Hardness: 30-90 Shore According to Work Environment
• Working Medium: Hydraulic Oil
• Transport Package: Carton or as Your Required
• Specification: All Standard, Customized
• Trademark: NextGen Tech
• Origin: Guangzhou, China
• HS Code: 4016931000
• Production Capacity: 500000PCS/Month

Product Description

Hydraulic seals and pneumatic seals are designed as per the cylinder working pressure, cylinder speed, operating temperature, working medium and application.
Hydraulic seals are generally relatively soft, non-metallic rings captured in groove or fixed in a combination of rings, forming a seal assembly, to block or separate fluid in reciprocating motion applications. Hydraulic seals are vital in machinery. Their use is critical in providing a way for fluid power to be converted to linear motion. Not only must the hydraulic seals prevent leakage of fluid from the Cylinder, but hydraulic seals must also withstand high pressures, extreme temperatures and transverse forces within the cylinder. In such applications, the function of Hydraulic Seals goes far beyond preventing fluid leakage.
Hydraulic seals can be made from a variety of materials such as polyurethane, rubber or PTFE. The type of material is determined by the specific operating conditions or limits due to fluid type, pressure, fluid chemical compatibility or temperature.
A static hydraulic seal is located in a groove and sees no movement - only sealing within its confined space, acting like gasket.
A type of dynamic hydraulic seal called a rod seal is exposed to movement on its inner diameter along the shaft or rod of a hydraulic cylinder.
A type of dynamic hydraulic seal called a piston seal is exposed to movement on its outer diameter along the tube or bore of a hydraulic cylinder.

A hydraulic seal is used to contain fluids and maintain the hydraulic pressure (piston seal, rod seal, back-up ring), to stop the inlet of impurities and to preserve the lubricating film on the rod (wiper seal) and to resist any deformation under a radial load by guiding the piston and rod (wear ring and guide strip).
NextGen Tech has a complete range of hydraulic seals and we can also assist you in creating custom-made seals for linear and static hydraulic applications.
 

Seal Functions
Each dynamic seal in a hydraulic cylinder has a special function to contribute to the performance of the system.
Piston Seal Functions
Acts as a pressure barrier and prevents fluid passing the piston; important for controlling the cylinder motion or maintaining the position at rest
Rod Seal Functions
Act as a pressure barrier and keeps the operating fluid inside the cylinder
Regulates a film of fluid on the surface of the piston rod as it extends; important to inhibit rod corrosion and lubricate the wiper and rod seal itself
Accept the lubrication film back into the cylinder when the rod retracts
Buffer Seal Functions
Protect the rod seal from fluid pressure spikes in excess of system pressure
Attenuate the fluctuations in system pressure, thereby improving rod seal performance by allowing the rod seal to deal with more constant or gradually changing pressure
Act as an internal excluder to keep system contaminants, such as metal particles from damaging the rod seal
Wiper Seal Functions
Prevent external contaminants from entering the cylinder assembly and hydraulic system (pump, reservoir etc)
Accept the lubrication film back into the cylinder when the rod retracts
Guide Rings (rod and piston) Functions
Prevent metal to metal contact between components
React to radial loads caused by side loads on the cylinder assembly

The NextGenTech bearing ring type FI is mainly used on piston rods. It provides guiding and bearing surfaces between rod and housing and prevents metal to metal contact between them.
The FI consists of an extremely abrasion-resistant and low-friction POM-PTFE Bronze compound. It has a U-shaped cross-section and is split with an angled butt joint. It can be spirally compressed inwards for fitting into the rod housing where it springs back out into corresponding installation grooves. The bearing groove arrangement secures it against axial movement.

Technical data
Temperature		-60°C / +225°C
Speed		Up to 3m/s
Medias		It can be used for hydraulic oil with a mineral oil base, for water-oil emulsions and for fire-resistant fluids as well as compressed air.
Material		Bronze-filled PTFE Polyamide(PA) Polyoxymethylene (POM)
Note		The above data are maximum values and cannot be used at the same time. For example, the maximum operating speed depends on material type, pressure, temperature and gap value.
Applications		Use on any piston in hydraulic cylinders.
Fitting		Split bearing ring FA to be snapped onto the piston.

Installation Instructions

FAQ

1.Our price:
Our price is not the lowest one, but compared with the same quality level product,ours is the best one.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
Kind: Oil Seals,O-ring, Rod/Piston seal, Gas seal, Guide elements, Large sized Seals Customized Seals.
Material: NBR/EPDM/FKM/Silicone/HNBR/PU

4. Shipping:
Quickly delivery, with several delivery ways, such as DHL/FEDEX/UPS/TNT express, Air and Ocean shipping way. We have several express accounts and can help you save cost. 

5, About customized Service:
Drawings or samples, it is enough. We can produce colored rubber seal just based on your drawing or samples with kinds of colors. We also can give the professional advice based on your requirement.